[atlas] Probe does not request IPv4 address via DHCP
- Previous message (by thread): [atlas] Anchors as target hosts for SLA
- Next message (by thread): [atlas] Probe does not request IPv4 address via DHCP
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Stanish Stanishev
stanish.stanishev at vivacom.bg
Thu Jun 8 16:39:30 CEST 2017
Hello, My probe(ID 16372) has disconnected from the Atlas network and in the Status I see USB flash corrupted. I did the troubleshooting - power off the probe, remove the USB, power on the probe, waited 10 mins, plugged brand new 4G USB. Several times with no success, So I decided to do a traffic capture of the uplink port where the probe is connected to. According to the capture the probe does not send DHCP requests. It sends only IPv6 traffic - Multicast Listener reports and Neighbor solicitation. Hence not getting IP address. I did several restarts - no change. Anybody has seen this issue before ? Any hints how to deal with such issue ? Thanks Stanish Sent via RIPE Forum -- https://www.ripe.net/participate/mail/forum
- Previous message (by thread): [atlas] Anchors as target hosts for SLA
- Next message (by thread): [atlas] Probe does not request IPv4 address via DHCP
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]