[atlas] Fwd: Questions with regard to the measurement status and running time
- Previous message (by thread): [atlas] Questions with regard to the measurement status and running time
- Next message (by thread): [atlas] Fwd: Questions with regard to the measurement status and running time
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Ernst J. Oud
ernstoud at gmail.com
Thu Sep 7 21:39:35 CEST 2023
> From: "Ernst J. Oud" <ernstoud at gmail.com> > Date: 7 September 2023 at 20:46:53 CEST > To: Jerome Mao <jxm959 at case.edu> > Subject: Re: [atlas] Questions with regard to the measurement status and running time > > My 0.02 euro; did you get the results of all 15 probes in that short period? I use Magellan to get results and after a minute sometimes not all results are in. Magellan has two options in the latest version; a timeout to stop streaming results after for instance 30 seconds or stop after a specified number of results have been received. > > I believe probes get instructions from controllers and ofcourse they don’t receive those all at the same time. Also probes might be busy I guess doing their default measurements (every 4 minutes). So it might take a while, I have seen results coming in after a couple of minutes. > > Not sure the above is correct, just my thoughts. > > Regards, > > Ernst J. Oud -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://lists.ripe.net/ripe/mail/archives/ripe-atlas/attachments/20230907/7ff6008c/attachment.html>
- Previous message (by thread): [atlas] Questions with regard to the measurement status and running time
- Next message (by thread): [atlas] Fwd: Questions with regard to the measurement status and running time
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]