<html> <head> <meta content="text/html; charset=ISO-8859-1" http-equiv="Content-Type"> </head> <body bgcolor="#FFFFFF" text="#000000"> Hi, On 05.01.2012 13:11, Philip Homburg wrote: > On 1/5/12 9:26 , Iñigo Ortiz de Urbina wrote: >> This is good to hear. I was meaning that according to the FAQ, >> there seems to be something around IPv6 (not affecting ping6 or >> traceroute6). See: " Q: I have an IPv6-only network. Will the probe >> work on it? A: Although the probe itself is IPv6-ready in general, >> some of the off-the-shelf software components on it are not (yet). >> We hope that this will be resolved soon, but until then the probe >> needs IPv4 to communicate with our infrastructure. The measurements >> themselves can run on IPv6. " > The main limiting factor is DNS. For static configurations it should > work. > > For normal (dynamic) configuration, the problem is that we have no > support for either DHCPv6 or the DNS resolver option in RA. So > without IPv4, the probe will not have a DNS resolver. maybe while waiting for an implementation of dhcpv6 or dns option in RA for the nodes you could simple use <code>fec0:0:0:ffff::1 as fallback. Well, it's deprecated but used in a well known OS.. Just an idea, no need for me - I've got ipv4+ipv6 for my node ;) </code> -- Jens Weibler IT-Services Hochschule Darmstadt <a class="moz-txt-link-abbreviated" href="http://www.h-da.de">www.h-da.de</a> University of Applied Sciences Fachbereich Informatik <a class="moz-txt-link-abbreviated" href="http://www.fbi.h-da.de">www.fbi.h-da.de</a> Schöfferstr. 8b D-64295 Darmstadt Tel +49 6151 16-8425 Fax +49 6151 16-8935 <a class="moz-txt-link-abbreviated" href="mailto:jens.weibler@h-da.de">jens.weibler@h-da.de</a> </body> </html>